Perfect collaboration between lubrication pump and grease

On the stage of industrial production, lubrication pumps and grease are like two tacit partners, working together to ensure the smooth operation of mechanical equipment. So, how to make the lubrication pump and grease work perfectly together?
 

Firstly, understanding the equipment requirements is crucial. Different mechanical equipment has differences in working conditions, load size, operating speed, etc., and their performance requirements for lubricating grease are also different. When selecting lubricating grease, it is necessary to consider the viscosity, water resistance, extreme pressure performance, high temperature resistance and other indicators of the grease according to the specific situation of the equipment. For example, for high-speed equipment, lubricating grease with good shear resistance and low viscosity should be selected; For equipment working in high-temperature environments, high-temperature resistant lubricating grease needs to be selected. At the same time, it is necessary to ensure the compatibility between the selected grease and the lubrication pump to ensure the normal operation of the lubrication system.
 

Secondly, it is crucial to correctly set the parameters of the lubrication pump. Adjust the working pressure, output flow rate, and oil supply cycle of the lubrication pump reasonably according to the lubrication requirements of the equipment and the characteristics of the lubricating grease. If the pressure is too high, it may cause grease leakage and damage the seals; If the pressure is too low, it may not be possible to deliver the lubricating grease to the parts that need lubrication. The output flow rate should be determined based on the number of lubrication points on the equipment and the amount of grease required for each lubrication point to ensure that each part receives an appropriate amount of lubrication. The oil supply cycle should be adjusted according to the operation of the equipment and the consumption rate of lubricating grease to avoid excessive or insufficient oil supply.
 

During installation and use, ensure that the connection between the lubrication pump and the lubrication pipeline is firm and reliable to avoid leakage. Regularly check the working status of the lubrication pump, including the sealing of the pump body and the operation of the motor. At the same time, it is necessary to inspect and maintain the lubrication pipeline to ensure that it is unobstructed and prevent blockage from affecting the lubrication effect.
 

The storage and addition of lubricating grease should not be careless. Lubricating grease should be stored in a dry, cool place, away from direct sunlight and high temperature environments. When adding lubricating grease to the lubrication pump, clean tools should be used to prevent impurities from entering and affecting the performance of the grease. At the same time, be careful not to mix different types of lubricating grease to avoid chemical reactions and reduce lubrication effectiveness.
 

In short, only by correctly combining lubrication pumps and grease, and conducting scientific management and maintenance, can they fully play their role, provide reliable guarantees for the stable operation of mechanical equipment, extend the service life of equipment, and improve production efficiency.