AMO-II-150S (Automatic intermittent gear pump)
A lightweight and compact pump unit without controller.

Directions for use
● This pump unit requires a separate control circuit to operate.
● Do not remove the oil strainer to keep the pump clear of foreign matter.
● Replace or clean the suction filter at least once a year. Click here to view the service list.
● Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range. Refer to the viscosity table.
● Do not use any special additive-contained oil, water soluble oil and solvent.
● Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change.
● Make sure that proper voltage and pressure are proper.
● Do not overtighten the discharge joint. Refer to the tightening torque table.
● Low-oil viscosity versions are available. Contact us for information.
● For system planning information, Contact us.